Loading the content...
Navigation
Account

   | 800.442.1440

Cart$0.00

No products in the cart.

Shop

Return to Previous Page
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Internal Halyard IHT-VS Series Flagpole Truck”

Related Products

HDT-1 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 5 1/2" Cast aluminum construction with a 3-7/8" outside diameter aluminum pulley on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

RTC-1 Series Flagpole Truck

External Halyard - Cap Style - Rotating - Single Pulley Fits Flagpole top diameters: 13/8" to 33/8" Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.

Winch Handles

(Note: be sure to order Winch ) Handles for stainless steel winches above. This handle is designed to be used with any of the stainless steel winches available on this page.

RTS-2-150 Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley 1-1/2" spindle thread, 2" aluminum pulleys Fits Flagpole top diameters: up to 4" Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/2" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. Maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.

RTC-2 Series Flagpole Truck

External Halyard - Cap Style - Rotating - Single Pulley Fits Flagpole top diameters: 13/8" to 23/8" Cast aluminum construction with 2" outside diameter cast nylon pulleys on 1/4" stainless steel axles. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.

RTS-1 Series Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 3 1/2" Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.

Flagpole Counterweights

3.5 to 14 lb Fabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

ST-1 Series Flagpole Truck

External Halyard - Cap Style - Stationary - Single Pulley Fits Flagpole top diameters: 13/8" to 2" Cast aluminum construction with a 1" outside diameter cast nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel screw. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 1/4". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Light duty truck for 1/4" rope halyard.

Stainless Steel Ball Top Ornaments with Satin Finish

Upgrade to a durable Stainless Steel Ball top. Satin brush finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

Gold Leaf Copper Ball Top Flagpole Ornaments

Upgrade to a Gold Leaf Copper Ball top. These high quality gold leaf copper ball tops will retain the gold color many years longer than the standard gold anodized aluminum. Constructed of a soldered copper ball, covered with XX deep gold leaf with a solid brass rod. Choose flagpole ball top size to closely match butt diameter of your flagpole. Gold leaf copper ball tops are often selected by commercial flagpole installations for their long lasting color and durability. Gold Leaf Copper flagpole ball tops are available in larger sizes. Contact Us for pricing on 18", 20", 22" and 24" tops.
Back to top