Loading the content...
Navigation
Account

Cart$0.00

No products in the cart.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Outrigger Flagpole Non-Tangle Rods”

fourteen − 12 =

Related Products

Internal Halyard IH-1 Series Flagpole Truck

Internal Halyard - Cap Style - Stationary Fits Flagpole top diameters: 3" to 3 1/2"Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by 5/16"-18NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13NC threading as standard. Recommended max rope diameter is 5/16".Designed to fit over the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.

RTSB Flagpole Truck – Cast Bronze Alloy

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 4"Cast bronze alloy construction with 2" outside diameter bronze alloy pulleys on 1/4" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For additional ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. Maximum halyard diameter is 5/16".Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.

Stainless Steel Ball Top Ornaments with Mirror Finish

Upgrade to a durable Stainless Steel Ball top. Mirror Finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

Pole Top Adapters

For Flagpole top diameters: 2 3/8" to 6"These flagpole top adapters are used in mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded plug installed. The pole top adapter is tapped 1-1/4" NPT and is designed to slip over the top of the flagpole and is secured by three 1/4"-20NC stainless steel set screws. Please specify color when ordering. Sizes available for flagpole top diameters of 2-3/8" to 6".Pole top adapters can be used to provide the threaded plug to accept a threaded style truck on flagpoles made of aluminum, fiberglass and wood. Pole top adapters can effectively be used to repair flagpoles that need a new truck when the old cannot be cleanly unthreaded. In this case the pole can be cut below the old truck and a pole top adapter of the appropriate size installed to receive the new truck.

HDT-1 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 5 1/2"Cast aluminum construction with a 3-7/8" outside diameter aluminum pulley on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

HDT-2 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 5 1/2"Cast aluminum construction with 3-7/8" outside diameter aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

XHDT, XHDT-SS Flagpole Trucks

Extra Heavy Duty External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 12 3/4"Cast aluminum construction with 37/8" outside diameter cast aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The recommended maximum halyard diameter is 3/8".Designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting or pole top adaptor. Extra Heavy duty truck for 3/8" rope halyard.

ST-1 Series Flagpole Truck

External Halyard - Cap Style - Stationary - Single Pulley Fits Flagpole top diameters: 13/8" to 2"Cast aluminum construction with a 1" outside diameter cast nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel screw. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 1/4".Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Light duty truck for 1/4" rope halyard.

Flagpole Counterweights

3.5 to 14 lbFabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

RTC-1 Series Flagpole Truck

External Halyard - Cap Style - Rotating - Single Pulley Fits Flagpole top diameters: 13/8" to 33/8"Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.
Back to top