Loading the content...
Navigation
Account

Cart$0.00

No products in the cart.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “RTC-2 Series Flagpole Truck”

three × three =

Related Products

Flagpole Counterweights

3.5 to 14 lbFabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

HDT-1 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 5 1/2"Cast aluminum construction with a 3-7/8" outside diameter aluminum pulley on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

Beaded Retainer Rings 5″ to 12″

for poles with 5" to 12" diameter, using 1" nylon ballsRetainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. The beaded retainer rings are constructed of either 1" or combination of 1" and 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps.Complete with stainless steel quick link. For sizes 5" through 12", White, Bronze and Silver colors.

RTS-1 Series Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 3 1/2"Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.

XHDT, XHDT-SS Flagpole Trucks

Extra Heavy Duty External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 12 3/4"Cast aluminum construction with 37/8" outside diameter cast aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The recommended maximum halyard diameter is 3/8".Designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting or pole top adaptor. Extra Heavy duty truck for 3/8" rope halyard.

Rope Retainer Rings

for flagpoles with butt diameters from 5" to 16-1/2"The rope retainer rings are constructed of #8 (1/4") rope with wire core, stainless steel thimbles and copper crimps. Our rope retaining rings come complete with a vinyl cover over the thimbles and stainless steel quick link. Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag.

Gold Anodized Aluminum Ball Top Ornaments

Replacement flagpole ball top ornaments for those found on many aluminum and fiberglass flagpoles, made of gold anodized aluminum.Choose flagpole ball top size to closely match butt diameter of your flagpole.Contact Us for:
  • Additional colors; clear anodized, satin, bronze #313, black and white.
  • Larger sizes.

RTS-2-150 Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley 1-1/2" spindle thread, 2" aluminum pulleys Fits Flagpole top diameters: up to 4"Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/2" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. Maximum halyard diameter is 5/16".Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.

Internal Halyard IHT-VS Series Flagpole Truck

Internal Halyard - Threaded Style - Stationary Fits Flagpole top diameters: up to 3 1/2"Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the truck housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1-7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to 3-1/2" outside top diameter with female fitting installed. The bottom spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. Recommended max rope diameter is 5/16".Designed to the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.

RTSB Flagpole Truck – Cast Bronze Alloy

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 4"Cast bronze alloy construction with 2" outside diameter bronze alloy pulleys on 1/4" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For additional ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. Maximum halyard diameter is 5/16".Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.
Back to top