Loading the content...
Navigation
Account

   | 800.442.1440

Cart$0.00

No products in the cart.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “ST-1 Series Flagpole Truck”

Related Products

HDT-1 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 5 1/2" Cast aluminum construction with a 3-7/8" outside diameter aluminum pulley on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

Stainless Steel Ball Top Ornaments with Mirror Finish

Upgrade to a durable Stainless Steel Ball top. Mirror Finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

Pole Top Adapters

For Flagpole top diameters: 2 3/8" to 6" These flagpole top adapters are used in mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded plug installed. The pole top adapter is tapped 1-1/4" NPT and is designed to slip over the top of the flagpole and is secured by three 1/4"-20NC stainless steel set screws. Please specify color when ordering. Sizes available for flagpole top diameters of 2-3/8" to 6". Pole top adapters can be used to provide the threaded plug to accept a threaded style truck on flagpoles made of aluminum, fiberglass and wood. Pole top adapters can effectively be used to repair flagpoles that need a new truck when the old cannot be cleanly unthreaded. In this case the pole can be cut below the old truck and a pole top adapter of the appropriate size installed to receive the new truck.

RTS-1 Series Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 3 1/2" Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.

Internal Halyard IH-1 Series Flagpole Truck

Internal Halyard - Cap Style - Stationary Fits Flagpole top diameters: 3" to 3 1/2" Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by 5/16"-18NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13NC threading as standard. Recommended max rope diameter is 5/16". Designed to fit over the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.

Stainless Steel Ball Top Ornaments with Satin Finish

Upgrade to a durable Stainless Steel Ball top. Satin brush finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

XHDT, XHDT-SS Flagpole Trucks

Extra Heavy Duty External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 12 3/4" Cast aluminum construction with 37/8" outside diameter cast aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting or pole top adaptor. Extra Heavy duty truck for 3/8" rope halyard.

Winch Handles

(Note: be sure to order Winch ) Handles for stainless steel winches above. This handle is designed to be used with any of the stainless steel winches available on this page.

Flagpole Counterweights

3.5 to 14 lb Fabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

HDT-2 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 5 1/2" Cast aluminum construction with 3-7/8" outside diameter aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.
Back to top