Loading the content...
Navigation
Account

   | 800.442.1440

Cart$0.00

No products in the cart.

Shop

Return to Previous Page
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Beaded Retainer Rings 13″ to 36″”

Related Products

RTS-2 Series Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 3 1/2" Cast aluminum construction with 2" outside diameter cast nylon pulleys on 1/4" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.

Pole Top Adapters

For Flagpole top diameters: 2 3/8" to 6" These flagpole top adapters are used in mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded plug installed. The pole top adapter is tapped 1-1/4" NPT and is designed to slip over the top of the flagpole and is secured by three 1/4"-20NC stainless steel set screws. Please specify color when ordering. Sizes available for flagpole top diameters of 2-3/8" to 6". Pole top adapters can be used to provide the threaded plug to accept a threaded style truck on flagpoles made of aluminum, fiberglass and wood. Pole top adapters can effectively be used to repair flagpoles that need a new truck when the old cannot be cleanly unthreaded. In this case the pole can be cut below the old truck and a pole top adapter of the appropriate size installed to receive the new truck.

Internal Halyard IH-1 Series Flagpole Truck

Internal Halyard - Cap Style - Stationary Fits Flagpole top diameters: 3" to 3 1/2" Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by 5/16"-18NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13NC threading as standard. Recommended max rope diameter is 5/16". Designed to fit over the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.

HDT-2 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 5 1/2" Cast aluminum construction with 3-7/8" outside diameter aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

Gold Leaf Copper Ball Top Flagpole Ornaments

Upgrade to a Gold Leaf Copper Ball top. These high quality gold leaf copper ball tops will retain the gold color many years longer than the standard gold anodized aluminum. Constructed of a soldered copper ball, covered with XX deep gold leaf with a solid brass rod. Choose flagpole ball top size to closely match butt diameter of your flagpole. Gold leaf copper ball tops are often selected by commercial flagpole installations for their long lasting color and durability. Gold Leaf Copper flagpole ball tops are available in larger sizes. Contact Us for pricing on 18", 20", 22" and 24" tops.

RTC-2 Series Flagpole Truck

External Halyard - Cap Style - Rotating - Single Pulley Fits Flagpole top diameters: 13/8" to 23/8" Cast aluminum construction with 2" outside diameter cast nylon pulleys on 1/4" stainless steel axles. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.

Stainless Steel Ball Top Ornaments with Mirror Finish

Upgrade to a durable Stainless Steel Ball top. Mirror Finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

Beaded Retainer Rings 5″ to 12″

for poles with 5" to 12" diameter, using 1" nylon balls Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. The beaded retainer rings are constructed of either 1" or combination of 1" and 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. For sizes 5" through 12", White, Bronze and Silver colors.

RTS-2-150 Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley 1-1/2" spindle thread, 2" aluminum pulleys Fits Flagpole top diameters: up to 4" Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/2" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. Maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.

RTC-1 Series Flagpole Truck

External Halyard - Cap Style - Rotating - Single Pulley Fits Flagpole top diameters: 13/8" to 33/8" Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.
Back to top