Loading the content...
Navigation
Account

No products in the cart.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Flagpole Cleats”

Related Products

OT Series Flagpole Truck

External Halyard - Cap Style - Stationary - Single Pulley Fits Flagpole top diameters: 2" to 31/2" Cast aluminum construction with cast nylon pulley (1-7/16" outside diameter on OTH, OT1 and OT25; 2" diameter on OT2, OT3 and OT35) on a 1/4" stainless steel axle. Designed to slip over the top of the flagpole and be secured by stainless steel set screws (one 1/4"-20NC on the OTH; three 5/16"-18NC on the OT1, OT2, OT25, OT3 and OT35). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. The recommended maximum halyard diameter is 5/16". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.

Flagpole Flag Arrangements

Flag arrangements are supplied with either 2 or 3 stainless steel quick links depending on the recommended flag size. Flag arrangements are constructed of stainless steel aircraft cable with a stainless steel thimble at each end with 2 copper crimps. These flag arrangements provide a method of attaching the flag or flags to the cable assembly. Flag arrangements also provide a convenient way to change flag size or number on the same cable assembly. Additional custom flag arrangement sizes available. Contact us for availability and prices.

Flagpole Cable Assemblies

Flagpole cable assemblies are constructed of 1/8" and 3/16" stainless steel aircraft cable incorporating a stainless steel swivel to minimize unraveling due to rotation of the truck assembly. The lower section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if not required. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops. However, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. Cable assemblies are designed for flagpoles with winch assemblies at 5' above grade. Additional custom cable assembly sizes available. Contact us for availability and prices as well as quantity pricing.

Rope Retainer Rings

for flagpoles with butt diameters from 5" to 16-1/2" The rope retainer rings are constructed of #8 (1/4") rope with wire core, stainless steel thimbles and copper crimps. Our rope retaining rings come complete with a vinyl cover over the thimbles and stainless steel quick link. Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag.

Internal Halyard IH-2 Series Flagpole Truck

Internal Halyard - Cap Style - Revolving - Wire Halyard Fits Flagpole top diameters: 3" to 7 1/2" All of these cast aluminum trucks have a 1 1/4" NPT threaded spindle which screws into the top of the flagpole where a female fitting has been installed. The top of all trucks are designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied in other sizes of threading. The ornament is secured to the truck with a size 1/4"-20NC stainless steel set screw. The extra large model has a stainless steel sealed lubricant bearing assembly while all other sizes utilize stainless steel ball bearings in both the upper and lower bearing races. All Sizes are supplied with a stainless steel bushing at the cable exit point except the IHT-3 which has a bronze fitting. Designed for use with stainless steel wire halyards.

Beaded Retainer Rings 5″ to 12″

for poles with 5" to 12" diameter, using 1" nylon balls Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. The beaded retainer rings are constructed of either 1" or combination of 1" and 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. For sizes 5" through 12", White, Bronze and Silver colors.

RTS-1 Series Flagpole Truck

External Halyard - Threaded Style - Rotating - Single Pulley Fits Flagpole top diameters: up to 3 1/2" Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.

RTS-2-150 Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley 1-1/2" spindle thread, 2" aluminum pulleys Fits Flagpole top diameters: up to 4" Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/2" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. Maximum halyard diameter is 5/16". Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.

Flagpole Counterweights

3.5 to 14 lb Fabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

Outrigger Flagpole Non-Tangle Rods

Non-Tangle Rods for wall mounted outrigger flagpoles. Our non tangle rods are constructed of 3/8" diameter stainless steel rod. All sizes are supplied complete with a solid bronze allow fitting which attaches to the grommet of the flag. 30' and 48' long rods are supplied with one bronze allow fitting which attaches to the bottom edge of the flag while the 72" and 84" rods are supplies with three bronze alloy fittings which attach to he bottom edge of the flag.
Back to top