Loading the content...
Navigation
Account

   | 800.442.1440

Cart$0.00

No products in the cart.

Shop

Return to Previous Page
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Gold Leaf Copper Ball Top Flagpole Ornaments”

Related Products

Winch Handles

(Note: be sure to order Winch ) Handles for stainless steel winches above. This handle is designed to be used with any of the stainless steel winches available on this page.

Stainless Steel Ball Top Ornaments with Satin Finish

Upgrade to a durable Stainless Steel Ball top. Satin brush finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

Flagpole Counterweights

3.5 to 14 lb Fabricated from 2" diameter steel our flagpole counterweights are then coated with Plastisol. The 3-1/2" long 3.5 lb weights are supplied with one eyebolt attached to one end. The 7", 7 lb and 14", 14 lb weights are supplied with an eyebolt attached to each end.

Beaded Retainer Rings 13″ to 36″

for poles with 13" to 36" diameter, using 1" and 2" nylon balls Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. The beaded retainer rings are constructed of either 1" or combination of 1" and 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. For sizes 5" through 12", White, Bronze and Silver colors.

ST-1 Series Flagpole Truck

External Halyard - Cap Style - Stationary - Single Pulley Fits Flagpole top diameters: 13/8" to 2" Cast aluminum construction with a 1" outside diameter cast nylon pulley on a 3/16" stainless steel axle. Designed to slip over the top of the flagpole and be secured by one 1/4"-20NC stainless steel screw. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a size 10-32 stainless steel pan head screw. Maximum halyard diameter is 1/4". Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Light duty truck for 1/4" rope halyard.

Beaded Retainer Rings 5″ to 12″

for poles with 5" to 12" diameter, using 1" nylon balls Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. The beaded retainer rings are constructed of either 1" or combination of 1" and 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. For sizes 5" through 12", White, Bronze and Silver colors.

Stainless Steel Ball Top Ornaments with Mirror Finish

Upgrade to a durable Stainless Steel Ball top. Mirror Finish. Choose flagpole ball top size to closely match butt diameter of your flagpole.

HDT-2 Series Heavy Duty Flagpole Truck

External Halyard - Threaded Style - Rotating - Double Pulley Fits Flagpole top diameters: up to 5 1/2" Cast aluminum construction with 3-7/8" outside diameter aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8". Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.

Pole Top Adapters

For Flagpole top diameters: 2 3/8" to 6" These flagpole top adapters are used in mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded plug installed. The pole top adapter is tapped 1-1/4" NPT and is designed to slip over the top of the flagpole and is secured by three 1/4"-20NC stainless steel set screws. Please specify color when ordering. Sizes available for flagpole top diameters of 2-3/8" to 6". Pole top adapters can be used to provide the threaded plug to accept a threaded style truck on flagpoles made of aluminum, fiberglass and wood. Pole top adapters can effectively be used to repair flagpoles that need a new truck when the old cannot be cleanly unthreaded. In this case the pole can be cut below the old truck and a pole top adapter of the appropriate size installed to receive the new truck.

Internal Halyard IHT-VS Series Flagpole Truck

Internal Halyard - Threaded Style - Stationary Fits Flagpole top diameters: up to 3 1/2" Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the truck housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1-7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to 3-1/2" outside top diameter with female fitting installed. The bottom spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. Recommended max rope diameter is 5/16". Designed to the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.
Back to top