No products in the cart.
Internal Halyard IHT-VS Series Flagpole Truck
Internal Halyard - Threaded Style - Stationary
Fits Flagpole top diameters: up to 3 1/2"
Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the truck housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1-7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to 3-1/2" outside top diameter with female fitting installed. The bottom spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. Recommended max rope diameter is 5/16".
Designed to the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.
Internal Halyard IH-1 Series Flagpole Truck
Internal Halyard - Cap Style - Stationary
Fits Flagpole top diameters: 3" to 3 1/2"
Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is held in place inside the truck by 5/16"-18NC stainless steel set screw. The truck has a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16"-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2"-13NC threading as standard. Recommended max rope diameter is 5/16".
Designed to fit over the top of aluminum, steel, or fiberglass flagpoles. Truck for 5/16" rope halyard.
Pole Top Adapters
For Flagpole top diameters: 2 3/8" to 6"
These flagpole top adapters are used in mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded plug installed. The pole top adapter is tapped 1-1/4" NPT and is designed to slip over the top of the flagpole and is secured by three 1/4"-20NC stainless steel set screws. Please specify color when ordering. Sizes available for flagpole top diameters of 2-3/8" to 6".
Pole top adapters can be used to provide the threaded plug to accept a threaded style truck on flagpoles made of aluminum, fiberglass and wood. Pole top adapters can effectively be used to repair flagpoles that need a new truck when the old cannot be cleanly unthreaded. In this case the pole can be cut below the old truck and a pole top adapter of the appropriate size installed to receive the new truck.
XHDT, XHDT-SS Flagpole Trucks
Extra Heavy Duty
External Halyard - Threaded Style - Rotating - Double Pulley
Fits Flagpole top diameters: up to 12 3/4"
Cast aluminum construction with 37/8" outside diameter cast aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. The recommended maximum halyard diameter is 3/8".
Designed to be used on flagpoles that have up to a 12-3/4" outside top diameter with a female fitting or pole top adaptor. Extra Heavy duty truck for 3/8" rope halyard.
RTSB Flagpole Truck – Cast Bronze Alloy
External Halyard - Threaded Style - Rotating - Double Pulley
Fits Flagpole top diameters: up to 4"
Cast bronze alloy construction with 2" outside diameter bronze alloy pulleys on 1/4" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For additional ease of rotation, product life and strength, these trucks utilize stainless steel sealed lubricant ball bearing assemblies. Maximum halyard diameter is 5/16".
Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.
RTS-2-150 Flagpole Truck
External Halyard - Threaded Style - Rotating - Double Pulley
1-1/2" spindle thread, 2" aluminum pulleys
Fits Flagpole top diameters: up to 4"
Cast aluminum construction with 2" outside diameter aluminum pulleys on 3/8" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/2" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. Maximum halyard diameter is 5/16".
Designed to be used on flagpoles that have up to 4" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 5/16" rope halyard.
HDT-2 Series Heavy Duty Flagpole Truck
External Halyard - Threaded Style - Rotating - Double Pulley
Fits Flagpole top diameters: up to 5 1/2"
Cast aluminum construction with 3-7/8" outside diameter aluminum pulleys on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".
Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.
HDT-1 Series Heavy Duty Flagpole Truck
External Halyard - Threaded Style - Rotating - Single Pulley
Fits Flagpole top diameters: up to 5 1/2"
Cast aluminum construction with a 3-7/8" outside diameter aluminum pulley on 1/2" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4"- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8".
Designed to be used on flagpoles that have up to a 5-1/2" outside top diameter with a female fitting or pole top adaptor. Heavy duty truck for 3/8" rope halyard.
RTS-2 Series Flagpole Truck
External Halyard - Threaded Style - Rotating - Double Pulley
Fits Flagpole top diameters: up to 3 1/2"
Cast aluminum construction with 2" outside diameter cast nylon pulleys on 1/4" stainless steel axles. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.
RTS-1 Series Flagpole Truck
External Halyard - Threaded Style - Rotating - Single Pulley
Fits Flagpole top diameters: up to 3 1/2"
Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting installed. The bottom of the spindle has a 1-1/4" NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
Designed to be used on flagpoles that have up to a 3-1/2" outside top diameter with a female fitting or pole top adaptor. Medium duty truck for 5/16" rope halyard.
RTC-2 Series Flagpole Truck
External Halyard - Cap Style - Rotating - Single Pulley
Fits Flagpole top diameters: 13/8" to 23/8"
Cast aluminum construction with 2" outside diameter cast nylon pulleys on 1/4" stainless steel axles. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.
RTC-1 Series Flagpole Truck
External Halyard - Cap Style - Rotating - Single Pulley
Fits Flagpole top diameters: 13/8" to 33/8"
Cast aluminum construction with a 2" outside diameter cast nylon pulley on a 1/4" stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4"-20NC on the RTC-1-2 and 5/16"-18NC on the RTC-1-238). The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC as standard but can be supplied with other sizes of threading if desired. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The recommended maximum halyard diameter is 5/16".
Designed to fit over the top of small aluminum, steel, wood or fiberglass flagpoles. Medium duty truck for 5/16" rope halyard.